What the Big Wing 270° Awning Wall Kit Does
The Big Wing 270° Awning Wall Kit transforms your Big Wing 270 Awning into a fully enclosed shelter. It zips on easily, giving you 360° protection from wind, sun, and light weather while creating a private space. Whether you're cooking, changing, or just relaxing at camp, the wall kit adds a secure perimeter without blocking airflow when you need it.
Big Wing 270° Awning Wall Kit at a Glance
- Big Wing 270° Awning - Wall Kit: The Big Wing 270° Awning Wall Kit easily zips on your Big Wing 270 Awning offering 360 protection and privacy. This is the core benefit: full enclosure for weather and privacy, not just partial shade.

Big Wing 270° Awning - Wall Kit - Big Wing 270° Awning - Wall Kit: Color coded zippers make installation a breeze. You don't need to guess which panel goes where—just match the zipper colors for a faster setup.
- Big Wing 270° Awning - Wall Kit: Two exterior doors allow easy access. A third interior door allows for easy access into the back of your vehicle. You can enter and exit from multiple sides and still reach your vehicle's cargo area without stepping outside.
- Big Wing 270° Awning - Wall Kit: Need extra ventilation? Open just the main door panels and keep the mesh closed for additional airflow. On warm or breezy days, you can let air circulate while keeping bugs and debris out.
- Big Wing 270° Awning - Wall Kit: Note: Due to the weight of the panels, use of the vertical support poles and guy lines is required for setup of the wall kit. This is a critical safety and stability requirement—never skip the poles and guy lines, especially in wind.
- Big Wing 270° Awning - Wall Kit: Minimum recommended height of the awning is 68" from the ground. If your vehicle's awning mounts lower than the minimum recommended height, the wall kit may not fit properly or provide adequate clearance.
Setting Up the Wall Kit for Weather Protection
Follow these steps to set up the Big Wing 270° Awning Wall Kit securely. Always use the vertical support poles and guy lines—they are required for safe use, especially in windy conditions.
- 1. Check your awning height: Measure from the ground to the lowest point of your Big Wing 270 Awning. It must be at least the minimum recommended height for the wall kit to fit correctly.
- 2. Unpack and identify panels: The wall kit includes multiple panels with color-coded zippers. Match the zipper colors to the corresponding sections of your awning for a straightforward installation.
- 3. Attach the wall panels: Starting from one end, zip the wall panels onto the awning. Work your way around until all panels are attached and the enclosure is complete.
- 4. Install vertical support poles and guy lines: Because the panels are heavy, you must use the vertical support poles and guy lines to keep the walls upright and stable. This is required for safe setup and to prevent sagging or collapse in wind.
- 5. Adjust doors for access and ventilation: Use the two exterior doors for entry and exit. For extra airflow, open the main door panels while keeping the mesh closed—this lets air circulate without letting in bugs. The third interior door provides direct access to the back of your vehicle.
Choosing the Right Side for Your Vehicle
The Big Wing 270° Awning Wall Kit is available in two fitment options: Passenger Side and Driver's Side. Choose the side that matches your awning's orientation so the interior door aligns with the back of your vehicle. This makes it easy to access gear without stepping outside the shelter.
Storing the Wall Kit When Not in Use
When your trip is over, the entire wall kit system easily stuffs into an oversized duffle bag. No complicated folding or rolling is required—just pack it away until your next adventure.

