How to Replace Condor 1 and Overland 1 Parts
By Roofnest | Tents & Gear for Overlanders | Published: 2026-10-20
Category: How-to Guides
Learn how to identify and replace common parts on Condor 1 and Condor Overland 1 tents. Step-by-step instructions help you maintain your rooftop tent without guesswork.
Quick answer
Replacing Condor 1 and Condor Overland 1 parts is straightforward if you know which parts fit your tent model. Stick to Condor 1-specific accessories and avoid mixing with Condor 2 parts.
Why model-specific parts matter
Condor 1 and Condor Overland 1 tents use unique mounting points and dimensions. Parts like awning poles and ladders are not interchangeable with Condor 2 or Condor Overland 2 models. Using the wrong part can damage the tent or cause unsafe setups.
The Condor 1 Parts category includes items such as awning poles and ladders designed specifically for the original Condor 1 tent. Similarly, Condor Overland 1 Parts covers accessories for the Overland 1 variant. Always verify the part number before purchasing.
Common parts that wear out
Awning poles are the most frequently replaced item due to bending or corrosion. Ladder sections can also wear over time, especially the pivot joints. Check these parts before each trip to catch damage early.
How to replace Condor 1 / Overland 1 parts
- Identify your tent model: Check the label on the tent fabric or the original packaging. Look for "Condor 1" or "Condor Overland 1" — not "Condor 2" or "Overland 2." If you're unsure, measure the mounting bracket spacing and compare with the official specs. A common mistake: assuming all Condor parts fit all Condor tents. The 1 and 2 generations are not compatible.
- Remove the damaged part: For awning poles, release the tension and slide the pole out of the mounting bracket. For ladders, remove the retaining pins or bolts using the correct size Allen key or socket. Keep the hardware in a safe place — you may reuse it with the new part. Take a photo of the assembly before disassembly. This helps when installing the new part.
- Install the replacement part: Align the new part with the existing mounting points. For poles, insert the end into the bracket and apply gentle pressure until it clicks or seats fully. For ladders, insert the pins or bolts and tighten to the manufacturer's torque spec (usually hand-tight plus a quarter turn). Do not overtighten ladder bolts — stripping the threads is a common mistake that requires a replacement bracket.
- Test the installation: Open and close the tent to verify the part moves freely without binding. For awning poles, extend the awning fully and check for stability. If the part rattles or feels loose, recheck the mounting hardware. Always test with the tent partially deployed before a full setup — catching a loose part early prevents accidents.
Parts you can replace
- Condor 1 Parts: Condor 1 Parts include awning poles, ladders, and more. They are not compatible with Condor 2 Tent models. Ordering the wrong generation part is the most common mistake — always confirm you have a Condor 1, not a Condor 2.
Condor 1 Parts - Condor Overland 1 Parts: Condor Overland 1 Parts include awning poles, ladders, and more. They are not compatible with the Condor Overland 2 Tent. Overland 1 parts share the same generation rule: they only fit the Overland 1, so double-check your tent model.
Condor Overland 1 Parts
