Falcon 3 EVO Awnex Floor Kit Setup Guide
By Roofnest | Tents & Gear for Overlanders | Published: 2026-10-19
Category: How-to Guides
Learn how to install the Falcon 3 EVO Awnex Floor Kit for added privacy and protection under your awning. Step-by-step setup and fit tips included.
Quick answer
The Falcon 3 EVO Awnex Floor Kit adds a ground sheet under your Falcon 3 EVO awning for a cleaner, more private camp space. Setup takes about 15 minutes once you understand the attachment points and fit notes.
Why add a floor kit to your awning
An awning floor kit turns open shade into a semi-enclosed room. The Falcon 3 EVO Awnex Floor Kit is designed specifically for the Falcon 3 EVO awning (Regular size) and works with both the Falcon 3 EVO Air and previous generation Falcon 3 EVO tents. It gives you a dedicated area to change clothes, store gear off the ground, or keep children and pets contained.
The main trade-off is the extra setup time and packed volume. You are adding a floor panel and the associated stakes and poles. If you move camp daily, you may prefer the awning alone. For base-camp style overlanding, the floor kit pays off in comfort.
Step-by-step setup
- 1. Lay out the floor kit: Unfold the floor kit on the ground where you plan to pitch the awning. Orient it so the attachment points face the awning rail on your vehicle. Check that the ground is clear of sharp rocks or sticks that could puncture the fabric. A common mistake is unfolding the floor kit too close to the vehicle, leaving no room to walk around it. Give yourself a 1-2 ft buffer.
- 2. Attach the floor to the awning: Starting at one corner, connect the floor kit's clips or straps to the corresponding loops on the Falcon 3 EVO awning. Work your way around, pulling the floor taut but not overstretching. If you have the wall kit installed, attach the floor to the walls first. If the floor seems to pull the awning out of shape, you may need to adjust the awning's tension straps before continuing.
- 3. Stake down the perimeter: Use the included stakes to secure the floor kit's corners and mid-points to the ground. Drive stakes at a 45-degree angle away from the floor for best hold. If the ground is hard, use a mallet or rock to seat them fully. Do not skip the mid-point stakes. Without them, the floor will ripple and collect water or debris.
- 4. Check fit and adjust: Walk around the setup and verify that the floor lies flat and the awning is still correctly tensioned. If you see sagging or bunching, loosen the floor attachment points and re-tension the awning, then reattach the floor. The floor kit is designed for the Regular size Falcon 3 EVO awning. If you have an XL or another model, it will not fit correctly.
- 5. Test the setup before your trip: Set up the floor kit at home or in a park before your first camping trip. This lets you confirm all parts are present and you understand the attachment sequence. It also lets you practice folding and packing the kit back into its storage bag. A dry run saves you from frustration at the campsite. You will also discover if you need extra stakes or a mallet.
Product facts
- Falcon 3 EVO Awnex Floor Kit: Modular Wall Kit to go with your Falcon 3 EVO Awning. Add these walls individually or as a complete set to give yourself extra privacy and protection underneath your Falcon 3 Evo Awning. Add the Floor Kit to build out your complete AWNEX system. You can buy walls and floor separately, so you can start with just the floor and add walls later if you want more enclosure.
Falcon 3 EVO Awnex Floor Kit
